Unives 1.7
Connect clock
8. Read Out Race.
Prepare the Bricon Club
-
Master ready for read out:
1.
You must initially connect the radio
-
frequency mother clock (see page 6).
2.
Connect the printer, press 6 in the menu
’
set time
’
and choose 1
’
set time
’.
3.
If you basket using any brand of ETS clock other than Bricon, you must also use the Bricon
Unives
-
box (see page 5) or Black Unives cable.
4.
Connect the power into the Bricon Club
-
Master (and Unives
-
box if necessary).
Some brands consume a lot of power while switching them on, therefore we recommend to connect
the
power to the Unives box if you also have non
-
Bricon clocks in the club.
5.
The main menu appears on the display of the Bricon Club
-
Master.
BRICON CLUB
-
MASTER
31
Choose menu option 2
‘
Read out
’
and press <OK> to confirm.
Basketing
Read out
Progress Reading
Delete BR+
Setup
Set time
Connect the ETS clock.
The Unives 1.7 screen disappear when a
Bricon clock is connected and the next step
should then be followed.
If you connect another brand of ETS clock
follow the instructions issued with that clock.
W. Smith WM 9876
Tarbes 09/06
Alencon 10/06
Exeter 10/06
Select the race to be read out using the
“▼”
and
“▲”
keys.
Press <OK> to confirm.
The clocking list will then be printed.
W. Smith WM 9876
Tarbes 09/06
Alencon 10/06
Exeter 10/06
To close the race press <OK> or
to keep the race open press <C>.
If there is only one race active the ETS
clock will deactivate immediately and can
be disconnected from the docking station.
If there is more than one race active, select
the race to be closed with
“▼”
and
“▲”.
To close the selected race press <OK> or
press <C> to keep the race open.
The ETS clock can then be disconnected.
W. Smith WM 9876
Tarbes 09/06
Alencon 10/06
Exeter 10/06
