BRICON CLUB
-
MASTER
35
17. Questions and solutions
.
17.1. It is not possible to erase races
.
If after a race, the ETS clock was not returned to the club for a read out, then it is not
possible to delete the race from the ETS clock.
All ETS clocks must be returned to the club after the race in order to close the race.
17.2. There is nothing to see on the screen of the ETS.
Confirm that the cable is correctly connected from the Club
-
Master to the ETS clock.
Check the power supply.
17.3. Rings are not being read.
If the rings are not being read, restart the Club
-
Master and repeat the process.
17.4. The pigeon is already basketed.
This is because the ring number is already in the ETS clock.
This could be because there are old races or training flights in the ETS clock.
17.5. The printer doesn
’
t print.
Check that it is a DOS
-
compatible printer, and also check each of the connections.
Also check that the number of print
-
outs required is not set to zero.
17.6. The ring is linked to another pigeon.
Pigeons that are no longer to be raced should be removed from the linking table.
The chip ring is then available to be used for another linking.
