BRG DuraTime HP Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 85

background image

18

Up timer starting at zero.  Stop the timer at 10 minutes and sound the alert horn for five
seconds.  Display hours and minutes on a four digit display with blinking colon while timer
is running.

1.

Mode 23-1=24 – display to 24 hour format

2.

Mode 5=5 – set alarm duration to 5 seconds

3.

Mode 7=0:00 – reset to zero

4.

Mode 9=0:10 – end time to 10 minutes

5.

Mode 13=1 – stop timer at the end time

6.

Mode 14=2 – set up timer direction

7.

Mode 20-1=3 – display hours and minutes with blinking colon

Up timer using only the Start button to start, stop and reset the timer.  Start at zero and
count up.  After the timer has ran for five seconds, allow the Start button to stop the timer.
When the timer is stopped, the start button will reset the timer and start it running again.
Display minutes and seconds only.

1.

Mode 13=0 – Do not stop the timer at the end time.

2.

Mode 20-1=12 – Display minutes and seconds

3.

Mode 37-9=5 – Use the leading edge to start and stop the timer. Wait five seconds before allow the start button
to stop the timer.

4.

Mode 37-19=1 – When the timer is stopped, pressing the Start button will reset the timer and start it running.

Elapsed days since last accident or incident on a four digit display. Up timer starting at
12:00, July 10, 2000. This assumes the starting date is older than the current date.

1.

Mode 9=12:00 – set starting hour and minutes

2.

Mode 32-18=1 – enable auto timer restart after power failure

3.

Mode 44-1=07/10 - starting month and day

4.

Mode 44-2=2000 - starting year

Elapsed days, hours, minutes and seconds since last accident or incident using a twelve
digit display. Up timer starting at 12:00, July 10, 2000. This assumes the starting date is
older than the current date.

1.

Set the current time using the up and/or down buttons

2.

Mode 1 – set the current month and day

3.

Mode 2 – set the current year

4.

Mode 18=3 – number of four digit displays

5.

Mode 37-34=21 – display elapsed days on first display (default)

6.

Mode 37-35=2 – display hours and minutes (default)

7.

Mode 37-36=1 – display seconds on third display

8.

Mode 32-18=1 – enable auto timer restart after power failure

9.

Mode 44-1=07/10 - starting month and day

10.

Mode 44-2=2000 - starting year

11.

Mode 9=12:00 – starting hour and minutes

Down timer starting at the 22:00 00, July 4, 2000, and counting down to 00:00 00, January
1, 2001. Display elapsed days, hours, minutes, seconds and hundredths on a twelve digit
display. Flash the display for ten seconds when the timer passes through the end of the

«
...
16
17
18
19
20
...
»

Содержание DuraTime HP






















































































Отзывы:

Нет отзывов

Похожие инструкции для DuraTime HP

Бренд: Icoco Страницы: 10

RCDC1 - IPOD/IPHONE ALARM CLOCK

Бренд: Panasonic Страницы: 2

Бренд: Uniel Страницы: 20

Бренд: Amano Страницы: 45

Бренд: TFA Страницы: 6

Бренд: MOB Страницы: 9

Бренд: Salora Страницы: 17

Бренд: Xiaomi Страницы: 74

Бренд: Trevi Страницы: 5

Бренд: Trevi Страницы: 20

Бренд: Hannlomax Страницы: 2

Бренд: Bodet Страницы: 29

Бренд: Bodet Страницы: 41

Бренд: Bodet Страницы: 43

Studebaker SB2101

Бренд: Studebaker Страницы: 1

Бренд: iCraig Страницы: 18

Бренд: Eton Страницы: 48

EXECUTIVE ATOMIC CLOCK 3.0

Бренд: La Crosse Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды