background image

Page 9 

 

   

Symptoms  

Solutions 

11.

 Water leaks from the 

bottom of the housing. 

  Inspect and clean the spray head, siphon tube and reservoir 

down-tube. 

Inspect the o-ring on the siphon tube for leaking. 

 

  Make sure the top cover and element gaskets are in place 

correctly and are in good condition. 

 

  Inspect the housing for damage or cracks. 

 

   

12.

 The warmers will not 

heat. 

  Test the warmer switch.  Replace it if necessary. 

Check to make sure the internal wiring is correct.  Inspect for 
loose, damaged or overheating wires or terminals.  Repair or 
replace wiring as necessary. 

Test the warmer element.  Replace it if necessary.  

13. 

The coffee tastes weak or 
does not taste good. 

  Inspect and clean the spray head, siphon tube and reservoir 

down-tube. 

The spray head should be in place and clean for proper coffee 
extraction. 

 

  Clean the area above the brew cone regularly. 

 

  Test the brewing temperature.  Adjust if necessary.  (See #6.) 

 

  Adjust the amount of ground coffee being used or adjust the 

grind of the coffee.  Too much coffee, or coffee that is ground 
too fine, may affect the flow of the water through the coffee. 

 

  Make sure that the paper filter being used is correct for this type 

of coffee brewer. 

 

   

14.

 There are coffee grounds 

in the brewed coffee. 

  Inspect the brew cone for wear or damage.  Replace it if 

necessary. 

 

  Adjust the amount of ground coffee being used or adjust the 

grind of the coffee.  Too much coffee, or coffee that is ground 
too fine, may affect the flow of the water through the coffee. 

 

  Make sure that the paper filter being used is correct for this type 

of coffee brewer. 

 

  Two paper filters may have been used accidentally.  Use only 

one filter per brew cycle. 

 

  Fine grind coffees and water softening systems may affect the 

way the water flows through the coffee and brew cone, and may 
cause coffee grounds to show up in the brewed coffee.  There 
are several option available to help solve this problem: Extended 
brew spray heads, wide base brew cones or a paper filter 
designed for faster water flow. Call Brewmatic for complete 
details and options. 

 

Содержание 1030581





















Отзывы: