A
THE WALL CAN BE ADJUSTED TO
THREE ANGLES - VERTICAL,
POSITIVE ANGLE, AND NEGATIVE
(OVERHANGING) ANGLE. IT IS
HELD AT THE DESIRED ANGLE BY
BOLTS AT THE SUPPORT FRAME
CROSS-BAR WITH SPACERS IN
THE SPACE BETWEEN THE
CHANNELS AND SUPPORT
FRAMES.
ATTACH THE TWO SPACERS TO
THE CHANNELS WITH SHORT
BOLTS AS SHOWN. THE RIGHT
SPACER IS WIDER THAN THE
LEFT.
SWING THE CHANNELS TO THE
DESIRED ANGLE AND ATTACH
THE SPACERS TO THE CROSS
BARS WITH THE LONGER BOLTS.
PUSH THE PLASTIC ENDCAPS
INTO THE FRONT OF THE
SPACERS ONCE THEY ARE
BOLTED DOWN.
SET THE WALL ANGLE
Page 9
M6-V install 1-15-16
Brewer's Ledge Inc.
WIDE SPACER (RIGHT SIDE)
NARROW SPACER (LEFT SIDE)
HARDWARE BAG: WM-3
