Breville LKE530, Инструкция

Страница: 7 / 12

7
Functions
BEFORE FIRST USE
Remove any promotional material attached to
your kettle. It is recommended that before first
use, the kettle is filled to the maximum level
with cold tap water, boiled and water discarded.
Your kettle will only operate when positioned
on the power base with the ‘On/Off’ switch in
the ‘On’ position.
The kettle will automatically switch off once
the water has boiled.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the power
base and open lid by pressing the lid release
button. Fill with the desired amount of
water.
NOTE
Always fill the kettle between the minimum
(700ml) and maximum (1700ml) marks on
the water window. Too little water will result
in the kettle switching ‘Off’ before the water
has boiled. Filling above the maximum mark
(MAX) may result in boiling water splashing
from the kettle.
2. Ensure the lid is locked firmly into place.
Position the kettle securely onto the
power base. Insert the power plug into a
230/240V power outlet and switch on.
3. Press the ‘On/Off’ switch to the ‘On’
position for water to boil.
NOTE
This kettle must only be used with the power
base supplied. Use caution when pouring
water from your kettle, as boiling water will
scald. Do not pour the water too quickly.
The kettle will automatically switch ‘off’ once
the water has boiled. Lift the kettle from the
power base and pour the water. Take care to
hold the kettle level, especially when filled
to the maximum level. To re-boil it may be
necessary to wait for a few seconds to allow the
control to reset.
If further heating of the kettle is not required,
switch ‘Off’ at the power outlet, unplug the
power cord and empty the water from the
kettle. Replace the kettle onto the power base
and close the lid.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the
appliance be operated with insufficient water. If
this occurs, the kettle will stop heating. Switch
‘Off’ at the power outlet and allow kettle to cool
before refilling. Remove the kettle from the
power base and add water. Return the kettle
to the power base. The safety device will then
automatically reset.