Bresser TemeoTrend Colour, Инструкция по эксплуатации

Страница: 28 / 36

28
1. Press and hold the UP button for 5 seconds to re-initialize
RC signal receiving.
2. If the time signal receiving fails again, the time can be
set manually.
manual time setting and user defined settings
1. Press and hold the MODE button (11) in normal display
mode for approx. 5 seconds to enter into time setting mode.
2. The value to be set will start flashing.
3. Press UP or DOWN to change the value.
4. Press MODE button to confirm and go to the next value
to be changed.
5. The setting order is year >> month >> day >> change
month and day >> 12/24-hour mode >> hour >> minute >>
language (EN = english, DE = german, FR = french, IT =
italian, SP = spanish, DU = dutch, SW = swedish) >> °C or
°F >> save and exit
6. If there is no operation for 20 seconds, the existing set-
ting will be saved and the device returns to normal display
mode. Press MODE button again to confirm and exit setting.
Alarm setting and activating/deactivating
NoTE:
Two different alarms can be set independently or together
in the main unit:
: Alarm on all weekdays (Monday - Friday)
: Single alarm at the set time
Alarm setting
1. Press the ALARM button (9) once or several times to display
one of the two alternative wake up times ( or ). Once
a mode is selected hold the ALARM button for 5 seconds to
get into alarm setting mode.
2. The figure to be set will start flashing.