Bresser TemeoTrend Colour, Инструкция по эксплуатации

Страница: 24 / 36

24
BEFoRE yoU START
ImPoRTANT!
1. Connect the main unit to the power outlet before inserting
the batteries in the remote sensor.
2. Place the main unit as close as possible to the remote unit.
3. Position the remote unit and main unit within the effective
transmission range.
Note, that the effective range is vastly affected by building
materials and position of the main and remote units. Due
to external influences (various RC devices and other sourc-
es of interference), the maximum distance can be greatly
reduced. In such cases we suggest to position the main
unit and the remote sensor at other places. Sometimes all
it takes is a relocation of one of these components of a few
inches! Though the remote unit is weather proof, it should
be placed away from direct sunlight, rain or snow.
PoWER SUPPLy
main unit
1. Plug the DC connector of the power cable (C) into the DC
power input (14).
2. Plug the Euro plug of the power cable into the power
outlet.
Remote sensor
1. Open the door of the battery compartment (16).
2. Install 2 batteries (AAA size 1.5V) strictly according to the
polarities shown.
3. Reinsert the battery compartment door.
Low battery display
When the batteries of the remote sensor need to be re-
placed the symbol
is shown on the display of the main
unit.