Bresser TemeoTrend Colour, Инструкция по эксплуатации

Страница: 27 / 36

27
GB
main unit signal receiving check
The transmission range is about 30 meters from the re-
mote station to the main unit (in open area). The main unit
should receive the temperature/humidity information from
the transmitter within 3-4 minutes after set-up. Should the
main unit not receive information from transmitter within 3-4
minutes after setting up, please check following steps:
1. Press and hold the DOWN button for 5 seconds to re-
start receiving from the transmitter; the data will normally be
received within 3 minutes.
2. If the first step does not yield a desirable solution, please
separate the main unit from the power supply and remove
the batteries from the remote sensor.
3. After that connect the main unit with the power supply and
reinsert the batteries into the remote sensor.
At the same time, please make sure the following:
1. The main unit as well the as transmitter should be at least
5-6.5 feet (1.5-2 meters) away from any interfering sources,
such as computer monitors or TV sets.
2. The main unit should not stand close to metal window
frames.
3. Please do not using other electrical products, such as
headphones or speakers, operating on the same signal fre-
quency (433 MHz).
4. Electrical devices operating on the same signal frequency
may also cause interference. This can include devices used
in the neighborhood as well.
Automatic time setting
1. After the main unit has been connected with the power
supply, it will automatically search for the radio signal. It ta-
kes about 3-5 minutes to finish this process.
2. If the radio signal is received, the date and time will be set
automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with
the following steps: