Bresser Temeo Hygro Quadro DLX, Инструкция по эксплуатации

Страница: 23 / 28

23 / 28
3. Press and hold ALARM button again for approx. 3 seconds to activate the temperature alarm.
4. Press ALARM button to confirm and continue to the next setting.
Note:
1. When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and
the alarm will sound for 2 minutes.
2. Press SNOOZE/LIGHT button when alarm sounds to interrupt the alarm. The alarm will then start
again after 2 minutes.
16 Comfort indication
1 2 3
1 COMFORT: Optimal (Temperature between
20-28°C and humidity between 40% and 70%)
2 DRY: Humidity >65%
3 WET: Humidity <45%
The comfort indication is a pictorial indication based on air temperature and humidity in an attempt to
determine comfort level.
Note:
• Comfort indication can vary under the same temperature, depending on the humidity.
• There is no comfort indication when temperature is below 0° C (32° F) or over 60° C (140° F)
17 Trend arrow indicators
1 2 3
1 Rising 2 Steady
3 Falling
The temperature and humidity trend indicator shows the trends of changes in the forthcoming few
minutes. Arrows indicate a rising, steady or falling trend.
18 Set Time Zone
To set a different time zone, proceed as follows:
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.