Bresser Temeo Hygro Quadro DLX, Инструкция по эксплуатации

Страница: 24 / 28

24 / 28
2. Press the MODE button multiple times until the display shows the time offset 00 Hr.
3. Press UP or DOWN button to select the desired time deviation in hours (-23 up to +23 hours).
4. Finally press the MODE button to save the settings and exit the setting mode.
19 Display brightness regulation
1. In normal display mode, press SNOOZE/LIGHT button, to activate the full display brightness for 10
seconds.
2. In mains adapter operation (DC 5V) the backlight remains always activated. The light sensor en-
sures that the brightness is automatically reduced in a dark environment.
3.
NOTICE! In battery mode the display brightness regulation is disabled.
20 Technical data
Base station
Batteries: 3x AAA, 1.5 V
Power supply (optional): DC 5V 500 mA mains plug
Temperature measuring unit: °C / °F
Temperature measuring range: -9,9°C - 60°C (-14°F - 140°F)
Humidity measuring range: RH 20% - 95%
Time format: 12 or 24 hours
Dimensions: 117 x 136 x 25 mm (B x H x T)
Weight: 244 g
Remote sensor
Batteries: 2x AAA, 1.5 V
Radio controlled signal: DCF
Transmission frequency: 433 MHz
Maximum radio frequency power: under 10mW
Temperature measuring unit: °C / °F
Temperature measuring range: -50°C - 60°C (-58°F - 140°F)
Humidity measuring range: RH 20% - 95%
21 EC Declaration of Conformity
Hereby, Bresser GmbH declares that the equipment type with part number: 7000022000000 is in
compliance with Directive: 2014/30/EU.The full text of the EU declaration of conformity is available at
the following internet address: http://www.bresser.de
22 Disposal
Sort packaging into different materials for disposal. Contact the local waste disposal service
provider or environmental agency for information about appropriate waste management.
Do not dispose of electrical devices with the household waste.