24
5.14 BAROMETRIC PRESSURE
The atmospheric pressure is the pressure at any location
of the earth caused by the weight of the column of air
above it. One atmospheric pressure refers to the average
pressure and gradually decreases as altitude increases.
Meteorologists use barometers to measure atmospheric
pressure. Since variation in atmospheric pressure greatly
affected by weather, it is possible to forecast the weather by
measuring the changes in pressure.
Baro pressure reading
TO SELECT ABSOLUTE OR RELATIVE BAROMETRIC PRESSURE MODE
In normal mode, press
[ BARO ]
key to switch between
ABSOLUTE / RELATIVE
barometric
pressure.
SET RELATIVE PRESSURE
1.
You can set the relative baro pressure, during relative pressure mode, press and hold
[
BARO ]
key for 2 seconds to enter relative pressure setting mode.
2. Press
[ WIND / + ]
or
[ NDX / - ]
key to set the value
3. Press
[ BARO ]
key to exit the setting.
5.15 RAIN
The
RAINFALL
section shows the rainfall or rain rate information.
TO SELECT THE RAINFALL DISPLAY MODE
Press
[ RAIN ]
key to toggle between:
1. DAILY
- the total rainfall from midnight (default)
2. WEEKLY
- the total rainfall of the current week
3. MONTHLY
- the total rainfall of the current calendar
month
4. TOTAL
- the total rainfall since the last reset
5. RATE
- Current rainfall rate (base on 10 min rain data)
Period of rainfall and rain rate
TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold
[ RAIN ]
key for 6 seconds to reset all the rainfall records.
NOTE:
To ensure to have correct data, please reset all the rainfall record when you reinstall your
wireless 7-IN-1 sensor to other location.
5.16 LIGHT INTENSITY & UV INDEX
The UV index and light intensity reading show on the bottom
right side of the display.
5.17 MAX / MIN RECORDS
The console can show the different reading’s daily MAX / MIN records in memory mode.
