21
-By pressing and hold
[SNOOZE / CONTRAST]
key for 2 seconds to stop the alarm and will activate
again in the next day
-By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the next day.
NOTE:
-
The snooze could be used continuously in 24 hours.
-
During the snooze, the alarm icon “ ” will keep flashing.
5.5 WIRELESS SENSOR SIGNAL RECEIVING
1.
The console display signal strength for the wireless sensor(s), as per table below:
Signal strength of outdoor 7-in-1
sensor
Signal strength of wireless sensor
channel
No signal
Weak signal
Good signal
2.
If the signal has discontinued and does not recover within 15 minutes, the signal icon will
disappear. The temperature and humidity will display “Er” for the corresponding channel.
3.
If the signal does not recover within 48 hours, the “Er” display will become permanent. You
need to replace the batteries and then press
[ SENSOR / WI-FI]
key to pair up the sensor
again.
VIEW THE OTHER CHANNELS (OPTIONAL FEATURE WITH ADD ON EXTRA SENSORS)
This console is capable to pair with 3 wireless sensors. If you have 1 or more wireless sensors,
you can press
[ CH / SET ]
key to switch between different wireless channels in normal mode,
or enable the auto-cycle mode in setting mode to display the connected channels at 4 seconds
interval.
During auto-cycle mode, the icon will show in Indoor / CH section on the display of console.
(find more information in chapter 5.1 / table: step 15)
5.6 TEMPERATURE / HUMIDITY
-The temperature and humidity reading are display on the outdoor and indoor / CH section.
-
If the reading is below the measurement range, it will show “LO”. If reading is above the measurement
range, it will show “HI”.
5.7 FEELS LIKE, HEAT INDEX, WIND CHILL & DEW POINT
Feels like, Heat index,
Wind chill & Dew point
can display on OUT temperature section. During
normal model, press
[ NDX / - ]
key to switch the OUT temperature as below sequence:
OUT temperature Feels like Heat index Wind chill Dew point
5.8 FEELS LIKE
Feels Like Temperature shows what the outdoor temperature will feel like. It’s a collective mixture
of Wind Chill factor (18°C or below) and the Heat Index (26°C or above). For temperatures in the
region between 18.1°C to 25.9°C where both wind and humidity are less significant in affecting
the temperature, the device will show the actual outdoor measured temperature as Feels Like
Temperature.
