Bresser 7002534, Инструкция по эксплуатации

Страница: 8 / 52

8
8 Insert the other side of the pole to the square
hole of the plastic stand
NOTE:
Ensure the pole and stand's indicator align
Step 8
9 Place the nut in the hexagon hole of the stand,
then insert the screw in other side and then
tighten it by the screw driver
Step 9
10 Add rubber pads before mount on the pole
NOTE
Pole not included
Step 10
MOUNTING GUIDELINES
- Secure the clamps (included) to a post or pole
-
Install the sensor at least 1.5m off the ground for better and more accurate measurements.
- Choose an open area within 150 meters from the LCD display console
NOTE:
- After replacing the batteries of the wireless sensor or the unit fails to receive wireless sensor signal of a
specified channel, you need to press and hold
[ SENSOR ] key on the console to pair this sensor again
- Avoid placing the transmitter in direct sunlight, rain or snow
-
The building material and the position of the receiver and transmitter affect the effective range. So try
various locations to obtain the best result
- Place the units away from metal objects and electrical appliances to minimize the interference Position
the receiver and transmitter within the effective transmission range: 150m in usual circumstances.
SETUP THE CONSOLE
INSTALL THE BACKUP BATTERY
1 Remove the battery door of the console
2 Insert a new CR2032 battery as per the polarity information marked on the battery compartment
3 Replace the battery door
NOTE:
The backup battery can backup: Time & Date, Max/Min & Past 24 hours weather records, Alert setting
values, offset value of weather data and Sensor(s) channel history.
The built-in memory can backup: Router setting and Weather server setting