Bresser 7002534, Инструкция по эксплуатации

Страница: 21 / 52

21
LIGHT INTENSITY
TO VIEW THE LIGHT INTENSITY READING
When barometric or index reading is displaying, press [ LIGHT ] key to
show the light intensity reading in same display location
TO SET THE LIGHT INTENSITY UNIT
When light intensity reading is displaying, press [ LIGHT ] key to change the unit in this sequence: Klux
→
Kfc
→
W/m²
WEATHER FORECAST
The built-in barometer can notice atmosphere pressure changes Based on the data collected, it can
predict the weather conditions in the forthcoming 12~24 hours within a 30~50km (19~31 miles) radius
Sunny Partly cloudy Cloudy Rainy Rainy / Stormy Snowy
NOTE:
- The accuracy of a general pressure-based weather forecast is about 70% to 75%
-
The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily
reflect the current situation.
- The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature
of outdoor When the temperature is below -3°C (26°F), the SNOWY weather icon will be displayed on the
LCD
BAROMETRIC PRESSURE
The atmospheric pressure is the pressure at any location of the earth caused
by the weight of the column of air above it One atmospheric pressure refers
to the average pressure and gradually decreases as altitude increases
Meteorologists use barometers to measure atmospheric pressure Since
variation in atmospheric pressure greatly affected by weather, it is possible
to forecast the weather by measuring the changes in pressure
TO SET THE BAROMETER UNIT
When barometric reading is displaying, press [ BARO ] key to change the barometer unit in this sequence:
hPa
→
inHg
→
mmHg
SWITCH BETWEEN ABSOLUTE / RELATIVE
1 When barometric reading is displaying, press and hold [ BARO ] key to enter the setting mode
2 Press [ ] or [ ] key to select ABSOLUTE / RELATIVE reading
3 Press [ BARO ] key to exit the setting
TO VIEW THE BAROMETRIC READING AND
When light intensity or index reading is displaying, press [ BARO ] key to show the barometric reading
WEATHER INDEX
When barometric or light intensity reading is displaying, you can press [ INDEX ] key to view the weather
index in this sequence:
HEAT INDEX → DEWPOINT.
HEAT INDEX
The heat index, which is determined by the Wireless 4-in-1 sensor's temperature & humidity data, when the
temperature is between 27°C (80°F) and 50°C (120°F)
Heat Index range Warning Explanation
27°C to 32°C (80°F to 90°F) Caution Possibility of heat exhaustion
33°C to 40°C (91°F to 105°F) Extreme Caution Possibility of heat dehydration
41°C to 54°C (106°F to 129°F) Danger Heat exhaustion likely
≥55°C (≥130°F)
Extreme Danger Strong risk of dehydration / sun stroke