70
4.4.3 UNIT SETTING
Use the
[ UNIT ]
key to change the unit of the readings on the console display.
Below is the operation step:
- Press and hold
[ UNIT ]
key for 2 seconds to enter the unit setting mode.
- Short press
[ UNIT ]
key to proceed to the next setting step.
- Press
[ / FORECAST ]
or
[ / INDEX ]
key to change the value. Press and hold the key
for quick-adjust.
- Press and hold
[ UNIT ]
key for 2 seconds to exit the unit setting mode at any time.
Setting items table:
Step
Mode
Setting procedure
1s
Temperature unit Press
[ / INDEX ]
or
[ / MODE ]
key to select °C or °F
2
Rain unit
Press
[ / INDEX ]
or
[ / MODE ]
key to select mm or in
3
Wind speed unit Press
[ / INDEX ]
or
[ / MODE ]
key to select m/s, km/h, knots
or mph
4
Distance unit
Press
[ / INDEX ]
or
[ / MODE ]
key to select k/m or mi (miles)
5
Baro pressure
unit
Press
[ / INDEX ]
or
[ / MODE ]
key to select hPa, inHg or
mmHg
6
Light intensity
Press
[ / INDEX ]
or
[ / MODE ]
key to select Klux, Kfc or W/m
2
4.4.4 BACK LIGHT
The main unit back light can be adjust, using the
[ HI / LO / AUTO ]
sliding switch to select the
appropriate brightness:
-Slide to the
[ HI ]
position for the brighter back light.
-Slide to the
[ LO ]
position for the dimmer back light.
-Slide to the
[ AUTO ]
position for the auto adjust back light that according to environment light level
