69
5
Month
Press
[ / INDEX ]
or
[ / MODE ]
key to adjust the month
6
Day
Press
[ / INDEX ]
or
[ / MODE ]
key to adjust the day
7
M-D/D-M format
Press
[ / INDEX ]
or
[ / MODE ]
key to select "Month / Day"
or "Day / Month" display format
8
Select Sunrise /
Sunset or Moon
rise / Moon set
display
Press
[ / INDEX ]
or
[ / MODE ]
key to select Sunrise /
Sunset or Moon rise / Moon set display
9
Time sync ON/OFF Press
[ / INDEX ]
or
[ / MODE ]
key to enable or disable
time sync function.
If you want to set the time manually, you should set time sync
OFF
10 Weekday language Press
[ / INDEX ]
or
[ / MODE ]
key to select weekday
display language
NOTE:
-In normal mode, press
[ SET ]
key to switch between year and date display.
-During the setting, you can back to normal model by press and hold
[ SET ]
key for 2 seconds.
4.4.2 SETTING ALARM TIME
1. In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2. Press
[ / INDEX ]
or
[ / MODE]
key to change the value. Press and hold the key for
quick-adjust.
3. Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4. Press
[ / INDEX ]
or
[ / MODE]
key to adjust the value of the flashing digit.
5. Press
[ ALARM ]
key to save and exit the setting.
NOTE:
-In alarm mode, the “ ” icon will display on the LCD.
-The alarm function will turn on automatically once you set the alarm time.
4.4.2.1 ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1. In normal mode, press
[ ALARM ]
key to show the alarm time for 5 seconds.
2. When the alarm time displays, press
[ ALARM ]
key again to activate the alarm function.
Or
press
[ ALARM ]
key twice to activate the alarm with ice pre-alarm function.
Alarm off
Alarm on
Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30
minutes earlier if the outdoor temperature is below -3°C.
When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
-Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next day.
-By pressing
[ALARM / SNOOZE]
key to enter snooze that the alarm will sound again after 5 minutes.
-By pressing and hold
[ALARM / SNOOZE]
key for 2 seconds to stop the alarm and will activate again in
the next day
-By pressing
[ ALARM ]
key to stop the alarm and the alarm will activate again in the next day.
NOTE:
-The snooze could be used continuously in 24 hours.
-During the snooze, the alarm icon “
” will keep flashing.
