38
CHANNEL AUTO-SCAN DISPLAY
• Press the
[CHANNEL]
button, until the
˚
C
s
icon is displayed, to enable an automatic scan of all
channels. The measurements from each channel will be displayed alternatively in 5-second inter-
vals.
NOTE: The channel auto-scan feature can only be activated if there is more than one outdoor
sensor operating and each is set to a different channel.
MAXIMUM AND MINIMUM RECORDED TEMPERATURE AND HUMIDITY
• The maximum and minimum recorded indoor and outdoor temperature and humidity will be
automatically stored in the memory of the main unit. If you press the
[MEM]
button, the respective
indicators,
[MAX]
or
[MIN]
will be displayed.
• To clear the memory, hold the
[MEM]
button for 3 seconds. The maximum and minimum tempera-
ture records will be erased.
ALARM FUNCTIONS
Weekday Alarm
˚
C
s
• This is a repeat alarm that will be activated daily from Monday to Friday at a set time.
Single Alarm
˚
C
s
• This is a single alarm that will be activated once at a set time.
Pre-Alarm
˚
C
s
• The pre-alarm will be activated and the icon will flash if the temperature of Channel 1 is falling to
+0 °C or below.
• This alarm is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single
alarm.
HOW TO SET THE ALARM
• Press the
[SET]
button to toggle between weekday alarm, single alarm or pre-alarm.
If the alarm is disarmed, the time will be displayed as “OFF W-ALM”
• Hold the
[SET]
button for 3 seconds. The hour digits will start flashing.
• Enter the hour by using the [
▲
] or [
▲
] button.
• Press the
[SET]
button to confirm, the minute digits will start flashing.
• Enter the minute by using the [
▲
] or [
▲
] button.
• Press the
[SET]
button to exit and the respective alarm icons [
˚
C
s
], [
˚
C
s
] and [
˚
C
s
] will be
activated.
