7
EN
3.
Insert new 3 x AA size rechargeable batteries into the battery compartment according to the
polarity mark inside battery compartment.
4.
Screw the battery door compartment on tightly.
5.
After inserting batteries, all LCD segment will be shown for 1 second.
PAIRING WIRELESS SENSOR TO CONSOLE DISPLAY
This Wireless PM2.5/PM10 Air Quality Sensor can connect to the Air Quality Display console.
1.
After the wireless air quality sensor is switched on, it will automatically enter registration mode for 10 minutes
until which it can be paired by the display console.
2.
Once the connection is successful, the signal strength indication
and PM2.5/PM10 information will
appear on the display console.
Note:
- If you need to re-assign the sensor channel, slide the channel slide switch to the new channel position, then use
a pin to press [ RESET ] key to restart the sensor.
- To avoid the sensor(s) and console pairing failure during new channel number assigned and setup, please
power up the sensor(s) first, and then press [ SENSOR ] key on the main unit.
- After connected to the console display, the reading will transmit every 12 seconds in the first 5 minutes. Every
reading transmission, the symbol of signal transmission , will flash 0.5 seconds at once.
DATA TRANSMISSION
The device transmits its updated reading at fixed interval of 60 seconds to the paired console receiver.
RESET THE SENSOR
In case of malfunction, use a pin to press
[ RESET ]
button to reset the sensor.
SENSOR INSTALLATION
The sensor is designed for desktop or wall mount for easy viewing. Follow the guidelines below for the sensor
placement.
1.
Choose an open area away from any emissions source of pollutants, heat source, or with air flow greater than
1m/s.
2.
Place the wireless PM2.5/PM10 sensor at least 1.5m to 4m above the ground to better illustrate the detection
of air quality in the human breathing zone.
3.
Do not expose the sensor to direct sunlight.
Wall mounting
Sensor can be mounted on the wall at different angle, either at
slant angle or vertically with the mounting adapter (included).
