background image

Operation Manual 

1. Introduction 

 

Professional Remote Weather Station 

Thank you for purchasing this Professional Remote Weather Station.  
Designed for everyday use, the weather station will prove to be an asset of 
great value for your personal use in the home or office.  Please read this 
instruction manual thoroughly to fully understand the correct operation of your 
weather station and benefit from its unique features. 

 

Table of Contents 

 
 

 

 

 

 

 

 

      

Page 

 

 

1. Introduction. ................................................................................... 2 

2. 

Intended Use  

2. Intended 

use. ................................................................................. 2 

 

Weather Station. ............................................................................ 2 

Weather Station 

System requirements for PC use................................................... 2 

The base station measures the indoor environment of its surrounding area and 
receives weather data from the following three outdoor sensors: 

Features of the base station. ......................................................... 3 
Features of the thermo-hygro sensor. ........................................... 3 

1) Thermo-Hygro 

Sensor 

Features of the wind sensor .......................................................... 3 

2) Wind 

Sensor 

Features of the rain sensor............................................................ 3 

3) Rain 

Sensor 

3. Safety 

Notes .................................................................................. 4 

 

4. Packaged 

contents ........................................................................ 5 

The received data is continuously updated to bring you the latest weather 
information on the base station’s LCD.  The outdoor thermo-hygro sensor is 
the main data communication unit since both the wind and rain sensors are 
connected to the thermo-hygro sensor for operating power and rely on it to 
communicate to the base station.  Weather data sent from the thermo-hygro 
sensor can be done by wireless 433MHz transmission (up to 100ft in open 
space) or by cable connection. 

5. Setting 

up....................................................................................... 6 

6. 

Operation using cable connection or wireless 433MHz................. 9 

7. LCD 

overview .............................................................................. 10 

8. Function 

test ................................................................................ 11 

9.  

Mounting ...................................................................................... 12 

10.  Resetting & factory settings......................................................... 14 
11.  

Function description .................................................................... 16 

 

12. Operation 

keys ............................................................................ 19 

Using the enclosed 6.5ft computer cable and CD-ROM, you can install the 
Heavy Weather software to your PC and access the latest weather information 
from your PC and upload up to 175 sets of recorded weather data received by 
the base station.  Recorded data can be used to generate statistics and charts 
onto your spreadsheets (175 sets of data is stored in the base even if the PC 
is switched OFF).  The software itself does not set any limits as to how many 
data sets can be transferred to PC. 

13.  Basic programming modes.......................................................... 21 
14.  MIN/MAX programming modes ................................................... 22 
15.  Alarm programming modes ......................................................... 23 
16.  Auto-memory for stored values ................................................... 30 
17. Accessories: 

extensions cables................................................... 30 

18. Changing 

batteries ...................................................................... 31 

19.  

Problems and interference with operation ................................... 32 

 

20.  

Transmission range ..................................................................... 33 

This weather station is designed to work easily with your PC, simply connect 
and disconnect the PC cable at any time. 

21.  Cleaning and maintenance.......................................................... 33 
22.  

Specifications .............................................................................. 34 

 

23. Warranty 

Information ................................................................... 36

 

System Requirements for PC use: 

 

The minimum system requirement for use of this “Heavy Weather” software is:  

This Operation Manual is part of this product and should be kept in a 
safe place for future reference. It contains important notes on setup and 
operation. 

Operating system: Windows 98 or above 
Processor: Pentium 166 MHz or above 
RAM: 32MB of RAM or above 

 

Hard disk: 20MB free space 

Please see www.heavyweather.info for a complete IM, FAQ and 
downloads of the most current software. 

CD-ROM drive 
 

 
 

For full details on operation and installation of the “Heavy Weather” software 
refer to the PC manual in PDF format on the CD-ROM. 

Содержание WS-2315



















Отзывы: