13
EN
NOTE:
- Once the alert is triggered, the alarm will sound for 1 minute and the alert icon and readings will be
flashing.
- If the alert alarm is automatically off after 1 minute, the alert icon and readings will still keep flashing until the
AQI reading is below of the alert level set.
- The AQI alert will sound again when the AQI readings rise above the alert level again
VIEW OTHER CHANNELS OF AIR QUALITY SENSOR
(OPTIONAL FEATURE WITH ADD ON EXTRA SENSORS)
This console is capable of paring up to 4 wireless air quality sensors. If you have 2 or more sensors, you can press
[ CHANNEL ]
key to switch between different channels in normal mode. Press and hold
[ CHANNEL ]
key for 2
seconds to enter auto-cycle mode to toggle the display of different channels at 4 seconds interval. During auto-
cycle mode, the icon will appear next to channel number on the display. Press
[ CHANNEL ]
key to stop auto
cycle and display the current channel.
ALARM TIME SETTING
1.
In normal mode, press and hold
[ ]
key for 2 seconds to enter alarm time setting mode.
2.
Press
[ / CH ]
or
[ ]
key to set the hours, and press
[ ]
key to proceed.
3.
Press
[ / CH ]
or
[ ]
key to set the minutes, and press
[ ]
key to exit the setup.
Note:
- During alarm setting mode, press and hold [ ] key for 2 seconds to exit setting directly.
- During setting, press and hold [ / CH ] or [ ] key to fast forward or fast backward.
- The alarm function will turn on automatically once you set the alarm time.
ACTIVATING ALARM
In normal mode, press
[ ]
key to activate the alarm function and show the alarm time for 5 seconds, or press
[ ]
key twice to close the alarm function.
Alarm on
Alarm off
When clock reach the alarm time, alarm sound will start. Where it can be stopped by following operation:
- Auto-stop after 1 minute alarming if without any operation and the alarm will activate again in the next day.
- By pressing [ SNOOZE / LIGHT ] key to enter snooze that the alarm will sound again after 5 minutes.
- In snooze mode or alarm sound, by pressing and hold [ SNOOZE / LIGHT ] key for 2 seconds to stop the alarm
and snooze mode. The alarm will activate again in the next day.
- By pressing [ ] key to stop the alarm and the alarm will activate again in the next day.
Note:
- The snooze could be used continuously in 24 hours.
- During the snooze, the alarm icon “ ” will keep flashing.
USE THE LCD BACKLIGHT
In normal mode, press
[ SNOOZE / LIGHT
] key to turn on backlight for 5 seconds.
