36
1.5 Operator controls
The following operator controls are located inside the
wildlife camera:
12 „OK“-Key
13 Display
14 „MENU“-Key
15 Main key
16 Arrow keys
The main key is used to select the 3 operating modes:
OFF, Setup and ON (see Figure 2).
A keypad with six control buttons are used in the SETUP
mode to select functions and parameters.
As shown in Figure 2, these are the keys: Up, Down,
Left, Right, OK and Menu.
The Menu button is used to enter the setup mode or to
exit the setup mode.
With the OK button you can manually take test photos
or videos in the setup mode. (The recording time of the
video is 30 seconds and can not be changed)
1.6 Supported formats
Here are some important notices. You don’t need to wor-
ry about the fi le system format of the camera unless you
have problems with reading the SD-card with your other
equipment. If this happenes, please format the SD-card
in the camera or in a computer fi rst and then reinsert the
card into your camera to make a try.
Item
Format
Image JPG
Video
AVI
File format
FAT32
