Bresser 12MP GAME CAMERA, Инструкция по эксплуатации

Страница: 72 / 100

72
MMS/SMTP Menu
Slide the power switch to "SETUP" mode and use or to select "MMS/SMTP Setup", then press "OK" to access
the MMS/SMTP menu. Below is a brief introduction to the MMS/SMTP setup function.
Note: (
All MMS/SMTP parameters must be configured using the PC software ).
Menu item Settings
( Bold = factory settings)
Description
MMS Status 800*600, VGA, SMS, AUS The MMS function is disabled on the standard setting. To activate
the MMS function, select either 800 * 600, VGA = 640x480 or
SMS = Short Message.
The camera sends MMS messages over a GPRS cellular network.
The GPRS service must be activated by your service provider if
necessary. The camera supports the following four transmission
frequencies (Quad Band): 850 MHz, 900 MHz, 1800 MHz and
1900 MHz.
For the MMS dispatch the correct MMS settings (e.g. URL, APN,
IP and Port) must be made. If you are not familiar with these set-
tings, please contact your mobile service provider.
MMS Number/
Day 0-99
(Note: ‘0” is unlimited)
This function can only be selected for the ON mode. The camera
sends one image when a new image or video was taken. You can
specify how many images are to be sent per day. Set, for example,
the maximum number to "10" and the camera sends 10 images. All
images taken beyond are then stored on the SD card.