Bresser 12MP GAME CAMERA, Инструкция по эксплуатации

Страница: 65 / 100

65
GB
2. Select the camera location according to the objects
under observation. A height of 1-2 metres is generally
recommended.
3. Switch on the camera by sliding the power switch to
the ON position.
Hint:
The camera cannot be turned on when no SD card is
inserted.
After switching the camera on, the red LED indicator
blinks for approximately 10 seconds. This buffer allows
you to locate the camera according to wish. After the 10
seconds the camera automatically functions capturing
images or videos according to the selected mode.
IMPORTANT:
The remote control cannot be used when the camera is
in the “ON” position. The camera automatically captures
images or videos according to setting.
3.4 TEST function
In order to capture user-defined imagery one can adjust
the settings by using the “TEST” function of the camera.
This is done by turning the power switch from the “OFF”
or “ON” position to the “SETUP” position. Various fea-
tures such as user-defined settings, manual photogra-
phy, preview or manual MMS messaging can be selected
accordingly through the remote control.
Hint: The settings for automatic image capturing, MMS
messages, etc., are deactivated when the camera is
switched to “TEST” mode.
The camera cannot be turned on when no SD card is
inserted.
3.4.1 Manual use
In TEST mode it is possible to capture pictures or videos
manually by pressing the
OK button on the remote con-
trol. Use the OK button to stop the manual recording.
*not included with your purchase