Bresser 12MP GAME CAMERA, Инструкция по эксплуатации

Страница: 64 / 100

64
There are 4 battery slots. Two slots are combined to
one group. The slots of the two groups are marked with
“1” and “2”. For normal power supply only one group is
needed but however it is recommended to insert batter-
ies in all the slots.
Slot 1
Slot 1
Slot 2
Slot 2
Please change the batteries in time. Remove used bat-
teries from the device immediately! A row of information
underneath the photos provides information on the date
and time, as well as the temperature, moon phase and
battery charge level.
3.2 Insert the SD-card and SIM-card*
Do not insert an SD card or a SIM card* or remove them
when the device is switched on (main switch in "SETUP"
or "ON" position).
Open the bottom cover. Insert the SD-card into the card
slot with the contacts facing upwards. Please note that
the card can only be inserted in one direction. Make
sure that the write-protect switch of the SD-card is in
the “write” position as otherwise the camera cannot be
switched on.
To use MMS/SMS or eMail functions, a suitable SIM-
card* must be inserted into the available card slot.
IMPORTANT:
This device operates only with Mini SIM-cards*. Micro
SIM-cards and Nano SIM-cards* are not compatible.
Please contact your mobile network provider for further
information about suitable Mini SIM-cards.
3.3 Switching the camera on
Before switching on, please pay attention to the follow-
ing:
1. Avoid temperature and motional disturbances in front
of the camera; for example air-conditioner, chimney or
other heat sources. This can have a negative effect on
the camera’s trigger function.
*not included with your purchase