brennenstuhl L DN 2806 S, Руководство по эксплуатации

Страница: 6 / 64

6
D
Operating Instructions SMD LED Light
SafETy NOTES:
1. Prior to commissioning, make sure the right voltage is available.
2. Prior to each use, make sure the light and mains supply cable are not damaged in any way.
Never use the lamp if you find damage.
caution! a damaged light or mains supply cable pose a risk to life due to electric shock!
3. Do not use this light without properly attached gaskets!
4. Do not use the work lamp in explosive environments in which flammable liquids, gases or
dusts are present. risk to life!
5. LED lights are extremely bright. Do not look directly at the lamp.
6. Damaged protective covers must be replaced with an original Brennenstuhl® protective cover
before the light can be used again.
7. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in ordert o
avoid a hazard.
8. Make sure the light is attached firmly and securely. Make sure the cable is not crimped or
otherwise damaged.
9. Keep children away from the lamp. Children cannot estimate the risk of electric shock.
Screws
Spring washers
Flat washers
Fastening screw
Spring washer
Flat washer
BA_SMD_LED-Leuchte_0487226_180903_KW36.indd 6 03.09.18 15:00