37
Chapter 8: Installing hutch options.
REQUIRED TOOLS
• Rubber Mallet
• Cordless Drill with #2 Phillips
• #2 Phillips Screwdriver
Slides always align to the front of the bed (finished edge). If you have a slide that is
shorter than the rest, this is for the bottom location near the baseboard notch (we
shorten the bottom drawer for custom baseboard notches made extra deep).
Follow the steps in this
chapter depending on how the
side hutch was configured.
Chapter 8:
Installing hutch options.
Detach each drawer slide into
two parts. First, pull out the
drawer slide and locate the
plastic release lever on the back
side. Pushing up or down on the lever will allow the inner slide to
pull out all the way.
3 Drawers And
Night Shelf
STEP 1
FIG. 8A - RELEASE LEVER
For video instructions of this chapter, visit:
breda.us/hutch-ops
Follow steps 1-5 if your side hutch was configured with drawers.
5 58
"
13 3
16
"
20
2534
"
3
4
"
Front Of
Panel
Baseboard Notch
Front Of
Panel
Left Hutch
Left Side
Left Hutch
Right Side
FIG. 8B
Attach the outer
portion of the drawer
slide (from Step 1) at
the locations shown
in
red
, with System
Screws from hardware
package #12. The blue
catch with springs
goes towards the back
side of the bed, closest
towards the wall.
3 Drawers And
Night Shelf
STEP 2
Right Hutch
Left Side
Right Hutch
Right Side
