20
Chapter 2: Bed Cabinet assembly.
Slide hutch in
direction of arrow and
tighten all cam fittings.
STEP 5
FIG. 2E
Attach “
Headboard
”,
“
Headboard Shelf
”
and “
Bed Cabinet
Bottom Nailer
” as
shown in Fig. 2F and
tighten cam fittings.
The Headboard will
normally sit at a slight
angle.
FIG. 2F
STEP 6
From the perspective shown, Cam fittings on the Headboard and Bottom Nailer
should be facing up, and tighten from the top side. If assembling vertically,
these cam fittings should face the wall the Bed Cabinet will attach to. Once
assembled, cam fittings on these parts should
not be visible.
Penthouse Murphy Beds:
The
“Headboard Shelf”
is not shown in above, but
will attach to the remaining 4 cam screws near the
“Headboard”
. From the
perspective shown, the cams should face the wall. If assembling vertically,
these cam fittings should face the floor. Once assembled, cam fittings on
these parts should not be visible.
