15
Chapter 1: Hardware insertion.
Baseboard Notch
Front
Front
Bottom
Bottom
FIG. 1D
STEP 4
Bed
Left Side
Right Hutch
Left Side
Attach each
mechanism to the
face of the side
panels as shown
in Fig. 1D using qty
5 bolts and qty 4
nylock nuts found in
Hardware Card #2.
The Bolts will go in
from the opposite
side of the panel
shown. The panels
have a recessed area
that the bolts will fit
into.
Red
locations indicate a bolt and nylock nut. The
green
locations will only
use a bolt and thread into the integrated T-Nut.
