26
Chapter 4: Assembling the Bed Face Panel unit.
Chapter 4:
Assembling the Bed Face
Panel unit.
REQUIRED TOOLS
• Cordless Drill and/or Impact Driver
• 5/16” Socket
• #2 Phillips Screwdriver
• Tape Measure
REQUIRED HARDWARE
• Hardware Card #3
• Hardware Card #7
Referring to Fig. 4A, lay doors face down in front of the bed
on a soft surface, such as a carpet, rug or blanket. Pay special
attention to the location of the pre-drilled handle holes.
Fig. 4B is color-coded to match the corresponding collection.
Penthouse Murphy Beds:
The faux-drawers should be
positioned closest to the Mechanism End (and Bed Cabinet).
STEP 1
FIG. 4A
FIG. 4B - DOORS, OVERHEAD VIEW
The “
Mechanism End
” is the end of
the bed where your head will be as
you lay in the bed and the “
Leg End
”
is the end that your feet will be.
For video instructions of this specific chapter, visit:
breda.us/frame
