manualshive.com logo in svg

BREDABEDS MURPHY BED W/ RIGHT HUTCH, Руководство пользователя

Поделиться
Скачать
BREDABEDS MURPHY BED W/ RIGHT HUTCH Скачать руководство пользователя страница 18

18

Chapter 1: Hardware insertion.

Spring Application Chart

Bed Size

Spring Quantity

Hole Numbers

Twin

4 or 5 spring per side

Holes 3 through 6 (4 springs) OR Holes 3 through 7 (5 springs)

Twin X-Long

5 or 6 spring per side

Holes 3 through 7 (5 springs) OR Holes 2 through 7 (6 springs)

Full

6 or 7 spring per side

Holes 2 through 7 (6 springs) OR Holes 2 through 8 (7 springs)

Queen

7 or 8 spring per side

Holes 2 through 8 (7 springs) OR Holes 1 through 8 (8 springs)

King

9 Spring Per Side

Holes 1 through 9

*Please note: These are recommendations only, the actual quantity needed will vary depending on the 

weight of the mattress including all bedding. We recommend starting with the higher quantity springs 

shown in the table for your bed size. Adjustment will be done later at the end of this booklet.

There are 9 Spring 

locations. Referring to the 

spring application chart 

and Fig. 1H-1K, insert 

springs into the hole 

numbers noted for the 

amount of springs you will be using. Position 

the spring with the open side of the hook 

facing down as shown in 

green

. Hook that side 

into the stationary portion of the mechanism 

and rotate the spring 180° as shown in 

blue

. 

Hook the opposite side into the corresponding 

hole on the movable portion of the mechanism as shown in 

orange

. You’ll need 

to rotate the mechanism arm as you go to keep tension on the springs you’ve 

inserted and to create the proper spacing for the spring you’re working on. Start 

with the higher quantity of springs listed for your bed size, you may have to add or 

remove springs depending on the weight of your mattress.

STEP 8

FIG. 1H

FIG. 1I

FIG. 1J

FIG. 1K

We recommend you start adding springs toward to the top of the mechanism first 

(at or near hole #9) and work your way down, adjusting the mechanism arm as 

you go to keep tension on the existing springs. Once finished, add a piece of 

masking tape to keep the springs from falling out of place.

For video instructions of this specific step, visit: 

breda.us/springs

King Sizes:

 The hooks will face the same direction. Hooks should both face down.

Содержание MURPHY BED W/ RIGHT HUTCH










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды