Breathe LIFE2000 Скачать руководство пользователя страница 47

Страница: 47 / 156

STAND-ALONE CONFIGURATION

ASSEMBLING THE VENTILATOR BATTERY CHARGER AND CHARGING THE VENTILATOR

Ventilator

Battery charger

AC power cord

Plug the ventilator AC power cord into the ventilator battery charger.

Connect the ventilator AC plug into an AC power source.

The ventilator battery charger indicator light will turn green or red when connected to AC power.

NOTE:

The ventilator can be used while the battery is charging.

Connect the ventilator battery charger cord to the ventilator battery

charger connection port.

The word UP on the battery charger cord

will be on top.

If powered on, check the Ventilator Battery Charge icon on the touch

screen to see the ventilator’s current battery charge status.

NOTES:

• When charging the battery, there may be a 5-10 second delay

before the Ventilator Battery Charge icon appears on the touch

screen.

• The ventilator performance is the same regardless of power source (internal battery or AC).

WARNING:

The interface, source gas supply hose, and power cords should be positioned to avoid restricting movement,

causing a tripping hazard, or posing a strangulation risk.

CAUTION:

• Do not place the battery charger on wet surfaces or use in wet environments. Wet environments may

damage the battery charger and may cause electric shock.

• Use only the Breathe Technologies® approved battery charger and cord set with the ventilator. If an

unauthorized battery charger or cord set is used with the ventilator, the ventilator may be damaged.

Содержание LIFE2000





























































































































































Результаты поиска

Содержание LIFE2000

Отзывы:

Похожие инструкции для LIFE2000

Бренды по названию

Популярные бренды

Breathe LIFE2000, Инструкция по эксплуатации

Результаты поиска

Содержание LIFE2000

Отзывы:

Похожие инструкции для LIFE2000

Бренды по названию

Популярные бренды