BRAYER BR2303, Инструкция по эксплуатации

Страница: 6 / 36

6 EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains.
• Take the handle (4), lift the lock (2) and open the
waffle maker.
• Simultaneously press the locks (5) and remove the
lower frying plate, then remove the upper flying plate
in the similar manner by pressing the locks (6).
• Wash all the frying plates (7) with warm water and
neutral detergent, rinse them and wipe dry.
• Install the required frying plates (7), to do this insert
the bottom part of the plate first and then press on
the upper part of the plate until the lock (2) clicking.
Make sure that the frying plates (7) are fixed properly.
• Before the first use smear some vegetable oil over
the frying plates (7).
• Close the waffle maker and insert the power cord
plug into the mains socket, the indicators (1) «pover»
will light up.
• When the indicator (3) «ready» lights up, unplug the
waffle maker and wait until it cools down completely.
• Take the handle (4), press the lock (2) button and
open the waffle maker. Remove the remaining oil
from the frying plates (7) with a paper towel or a
clean cloth.
Notes:
- when you switch the unit on for the first time,
some smoke or foreign odor may appear. It is
normal and not covered by warranty.
- the foreign odor can change the taste of the first
waffles that you made, so it is not recommended
to eat them.
MAKING WAFFLES
• Make the batter.
• Install the waffle maker correctly.
• Install the frying plates for making waffles (7).
• Insert the power cord plug into the mains socket, the
indicators (1) will light up.