INSTRUCTION
MANUAL
• Raise the top cover and open the base plate.
• Insert the end of the label roll inside the
dispenser. (labels should be facing up)
• Insert the roll into the axis of the label roll
holder and close the cover.
LOADING THE LABELS:
STEP 1
• Turn the dispenser upside down.
• Pull the labels through the first slot of the
base plate, near the applicator roller. (see
picture at far right for more details)
• Pull about 9 cm of label roll ribbon through
the slot.
STEP 2
• Insert the label roll ribbon through the second
slot of the base plate.
• Close the base plate – it will “click”.
STEP 3
• Begin to make the labels advance.
• After five or six dispenses, the labels should
dispense smoothly.
• Enjoy your new label dispenser!
STEP 4
SEE REVERSE SIDE FOR REPLACING INK ROLL & FOR SETTING PRINTHEAD >>
base
plate
>
NOTE: Remove 6-7 labels to make loading easier.
