INSTRUCTION
MANUAL
• Open front cover by pulling out the lower portion
of the cover with your hand.
• Once opened, the ink roller holder will appear.
• Release the ink roller by pushing lightly on its
lateral plastic ends.
• Hook a new ink roller into place.
REPLACING INK ROLL & ADJUSTING PRINTHEAD
Changing The Ink Roller
NOTE:
Use gloves to avoid ink stains on hands.
To change the printing data (ie: sterilizer, load number, date):
• Slide the dialing knobs out and turn backward or forward.
• The bottom or top line can both be set to ‘not print’. Turn
the knobs to a blank space – no data will print there.
• Once printing data is set to your preference, slide knobs
back in.
Setting Printing Information
• Using a screwdriver, loosen the screw on the guide plate
on both sides.
• Move the printhead forwards or backwards to set print
location higher or lower on the label.
• Tighten screws on both sides.
• Test print and adjust as needed.
Adjust Print Location on Label
Limited Lifetime Warranty
Labelex honours a lifetime warranty under normal use conditions. If you find a material or manufacturing defect with the dispenser,
please notify the company where you purchased the dispenser system. Labelex will repair or replace the dispenser entirely free of charge
provided the damage has not been caused by misuse, negligence, accident, or abuse.
CONTACT YOUR LABELEX DEALER FOR FURTHER ASSISTANCE!
