BRAYER BR1607, Инструкция по эксплуатации

Страница: 9 / 52

9 EN
• Turn the meat grinder head (7) counterclockwise until
locking (pic. 2).
• Install the screw (8) into the meat grinder head (7)
body (pic. 3).
• Install the crossed blade (9) (pic. 4).
• Select one of the plates (10) and set it over the
blade, matching the ledges on the plate with the
grooves on the meat grinder head body (7) (pic. 5),
tighten the nut (11) (pic. 6).
• Always use the food tray (6) and pusher (5) during
the operation (pic. 7).
• Recommendations:
- Defrost frozen meat thoroughly. For better
processing, cut meat into strips (20x20x60 mm) or
cubes (20x20x20 mm).
- During operation, use only the pusher (5) supplied
with the unit. Do not apply excessive effort while
pushing the meat or other products.
- Do not push meat with your hands or any other
objects.
• After the operation is finished, switch the meat
grinder off by setting the operation mode switch
(1) to the position «OFF», unplug the unit and then
disassemble it.
• To disassemble the meat grinder head (7), unscrew
the nut (11) by turning it counterclockwise, remove
the installed plate (10) from the meat grinder head
(7) body, remove the crossed blade (9) and the screw
(8) (pic. 23).
• To remove the meat grinder head (7), press the
lock button (3), turn the meat grinder head (7)
counterclockwise and remove it (pic. 24).
• Wash all removable parts in warm water with a
neutral detergent. Rinse and dry.
MAKING KEBBE
• Kebbe, Kibbeh or kubba is a Mediterranean dish
cooked of beef or mutton, wheat flour and spices.
• Use the kebbe attachment (13) to make hollow rolls
of the base. The rolls are filled and deep fried. Try
making various fillings for the rolls.
ATTENTION!
• When installing the blade (9), make sure that the
cutting edges of the blade (9) face the plate (10).
If the blade is installed improperly, it will not grind
meat.
• The fine cutting plate (10) can be used for
processing both raw and cooked meat, fish, etc.
• The coarse cutting plate (11) can be used for
processing raw meat, fish, vegetables, dried fruit,
cheese, etc.
• Insert the power plug into the mains socket.
• Switch the meat grinder on by setting the operation
mode switch (1) to the position «1 or 2».
- 1 – low rotation speed, recommended for
processing meat products;
- 2 – high rotation speed, recommended for
processing vegetables or fruits.