BRAYER BR1242, Инструкция по эксплуатации

Страница: 4 / 21

6 7 en en
THe UnIT IS InTenDeD FOR HOUSeHOLD USe
OnLY, DO nOT USe THe UnIT FOR COMMeRCIAL
OR LABORATORY PURPOSeS.
BeFORe THe FIRST USe
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
• Before using the unit wash the whisk attachment (7),
the bowl (9), the chopping knife (10) and the cup
(11) with warm water and a neutral detergent and
dry them.
• Wash only the lower part of the blender attachment
(1), clean the outer surface with a slightly damp cloth.
never immerse the blender attachment (1) into water
or any other liquids completely.
• Wipe the motor unit (2), the chopper geared lid (8),
the whisk attachment gear (6) with a soft, slightly
damp cloth and then wipe them dry.
USInG THe BLenDeR ATTACHMenT
Continuous operation time should not exceed
60 seconds while using the blender attachment
(1). Make at least 3 minutes break between the
operation cycles.
• Use the blender attachment (1) for making sauces,
mayonnaise, fruit puree, baby food, mixing various
ingredients and for processing fruit and vegetables
containing enough liquid.
Before installing the blender attachment (1), make
sure that the power plug is not inserted into the
mains socket.
• Insert the blender attachment (1) into the motor unit
(2), and turn it counterclockwise as far as it will go,
make sure that the attachment is fixed properly (fig.
1).
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl
with food that you want to chop/mix; you can also put
the food in the measuring cup (11).
ATTenTIOn!
When chopping hard vegetables, for example, car­
rots — cut the carrot into small 15x15x15 mm pieces
and put them in the cup (11). The maximal weight of the
carrot should not exceed 250 g. Add 350 ml of water.
ATTenTIOn!
do not immerse the blender attachment (1), the
motor unit (2), the chopper geared lid (8), the whisk
attachment gear (6), the power cord and the power
plug into water or any other liquids.
ATTenTIOn!
Hold the motor unit (2) with the blender attachment
(1) vertically while processing the food.
• To switch the unit on, press and hold down the
button (4) . Use this operation mode for mixing liquid
products.
• When you press and hold the button (4) you can
control the attachment rotation speed by turning
the control knob (5). Use this operation mode for
processing of liquid and solid products.
• For operation at the maximal rotation speed, press
and hold down the button (3) «TURBO».
•
notes:
­ products should be put into the bowl before the
unit is switched on. The amount of products to be
processed should not exceed 2/3 of the capacity
of the bowl in which they are processed.
­ before chopping and mixing peel the fruit, remove
inedible parts, such as stones, and cut fruit into
15x15x15 mm cubes. Put them into a bowl and
add some juice or water. The maximal amount of
products should not exceed 350 g and 250 ml of
water or juice.
­ do not chop or mix frozen food.
• To switch the blender attachment (1) rotation off
release the button (3 or 4).
• After you finish the unit operation, take the power
plug out of the mains socket and remove the blender
attachment (1), turning it clockwise.
• ATTenTIOn!
­ do not remove the blender attachment (1)
during the unit operation.
­ To avoid damaging the knives of the blender
attachment (1) do not process very hard
products, such as cereals, rice, coffee beans,
hard cheese, frozen food etc.
­ If the foodstuffs are hard to chop with the
blender attachment (1), add some water, juice,
liquor etc.
USInG THe CHOPPeR
Continuous operation time should not exceed 30
seconds while using the chopper attachment. Make
at least 3 minutes break between the operation
cycles.
• The attachment is used to chop meat, cheese, onion,
herbs, garlic, carrots, walnuts, prunes, vegetables
or fruit.
ATTenTIOn!
do not chop very hard products, such as nutmegs,
coffee beans, cereals, frozen food or ice.