Brave VH0622 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

background image

Operating Safety

✔

ALLOW ONLY ONE (1) PERSON TO LOAD AND OPERATE THE LOG SPLIT-
TER.

✔

Allow only adults to operate the log splitter - no one under the age of 18.

✔

Always keep bystanders, including children and pets, at least twenty-five (25)
feet away from the work area. Only the operator should stand near the equip-
ment and only within the safe operating area prescribed in this manual (see the
photos on safe and unsafe operating zones in the “Operation” section.)

✔

When the ram of the log splitter is in the return mode, keep your hands off the
machine — the log splitter is designed to automatically stop when the cylinder
is fully retracted.

✔

ALWAYS disconnect the spark plug wire when the log splitter is not in operation.

✘

Do not allow any person to operate the log splitter until they have read and
understood the safe operating instructions contained in this manual.

✘

Do not, under any circumstances, alter your log splitter. This equipment was
designed and engineered to be used in accordance with the operating instruc-
tions. Altering the equipment, or using the equipment in such a way as to cir-
cumvent its design capabilities and capacities, could result in serious or fatal
injury and WlLL VOID THE WARRANTY.

✘

Never operate, or allow anyone else to operate, this equipment while under the
influence of medication, drugs, or alcohol.

✘

Never wear loose clothing or jewelry that may get caught or become entan-
gled in the log splitter.

✘

NEVER place hands or feet between log and splitting wedge or between log
and ram during the forward or reverse stroke.

✘

DO NOT STRADDLE OR REACH ACROSS THE SPLITTING AREA WHEN
OPERATING THE LOG SPLITTER.

✘

Do not step over your log splitter when the engine is running, because you may
trip or accidentally engage the ram.

✘

NEVER attempt to load your log splitter while the ram is in motion.

✘

Only use your hand to operate the control lever. NEVER use your foot, knee, a
rope, or any other extension device.

Log Splitting Safety

✔

Always keep your fingers away from any cracks that open in the log during the
splitting operation.

800-350-8739

5

Brave Products, Inc.

Safety

«
...
5
6
7
8
9
...
»

Содержание VH0622

















































Отзывы:

Нет отзывов

Похожие инструкции для VH0622

Бренд: Sealey Страницы: 2

Бренд: ZIPPER MASCHINEN Страницы: 133

Бренд: Tajfun Страницы: 32

GARLAND CHOPPER 607 VE

Бренд: Glasswelt Страницы: 120

Power Force KCG-26LS

Бренд: King Canada Страницы: 14

Бренд: Hud-son Страницы: 44

Бренд: EDER Страницы: 32

Бренд: BW Machinery Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды