manualshive.com logo in svg

Brave VH0622, Руководство владельца/оператора и по безопасности

Поделиться
Скачать
Brave VH0622 Скачать руководство пользователя страница 22

Never attempt to split wood across the
grain.  The log splitter was not designed for
cross-grain splitting.  Doing so will dam-
age the log splitter and may cause person-
al injury.

3

.  Start the engine using the instructions from

the engine manual.  If the log splitter has
not been running (cold engine), warm up
the engine and hydraulic system by run-
ning the engine at half throttle for 3 to 4
minutes, then advance the engine throttle
control to maximum speed.

Operation – Horizontal Position

4

.  Use the following photos for the correct and incorrect methods of splitting logs.  Never

split a log using an incorrect or unsafe method.

a

.  Place the log on the log splitter.  Grasp

the log on the sides near the middle of
the block.  Center the log, side-to-side,
on the rail of the log splitter, making
sure that the sawed end is against the
large plate (base plate) at the opposite
end from the hydraulic control valve
control lever.

Do not place your hands on the
ends of the log when loading the
log splitter.  This is a very

UNSAFE method and could result in injury
to your hands.

WARNING

CAUTION

Brave Products, Inc.

20

800-350-8739

Operation

Содержание VH0622

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды