manualshive.com logo in svg

Brave VH0622, Руководство владельца/оператора и по безопасности

Поделиться
Скачать
Brave VH0622 Скачать руководство пользователя страница 11

Unpacking the Crate

1

.  Cut the metal banding and remove the top,

sides, ends, and protective plastic cover-
ing of the packing crate.  Do not unband or
remove the base unit or the rail unit from
the bottom pallet at this time.

2

.  Without cutting the banding straps, care-

fully check the larger components on the
crate for shipping damage.  If the parts are
damaged call Brave Products at (800)
350-8739.

3

.  Open the cardboard box and make sure all the smaller parts have been shipped.  The

chart in the “Shipping List” section provides a complete list of all the parts shipped with
your log splitter.  If any parts are missing, call Brave Products at (800) 350-8739.

NOTE:

The contents of the cardboard box includes the hitch assembly, valve handle,

two safety chains, and one bag of hardware, as shown.  The contents will also include
the fenders and mounting brackets for model VH0626 only.

Model VH0622

Model VH0626

800-350-8739

9

Brave Products, Inc.

Assembly Instructions

Содержание VH0622

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды