manualshive.com logo in svg

Brave VH0622, Руководство владельца/оператора и по безопасности

Поделиться
Скачать
Brave VH0622 Скачать руководство пользователя страница 16

17

.  Attach high-pressure hose (A) to the bot-

tom valve fitting.

NOTE:

The high-pressure hose is self-seal-

ing and does not require any type of sealing
material.  Tighten the fitting with the 10 inch
crescent wrench.

18

.  Attach the end of low-pressure return

hose (B) to the fitting on top of the valve.
Position and tighten the hose clamp
approximately 3/8 inch from the end of the
hose.

NOTE:

Steps 19 and 20 apply to installation of

fenders on model VH0626 only.

19

.  Install the left and right-hand fender

brackets using two 5/16-18 x 3/4 inch long
hex head bolts and locknuts for each
bracket.  Install the bracket with the slot-
ted holes against the base unit (round
holes up). 

NOTE:

The right-hand side of the log splitter is

the right side when viewed from the hitch end.

20

.  Bolt the fenders onto the fender brackets

using two 5/16-18 x 3/4 inch long hex
head bolts and locknuts.  The fenders are
interchangeable (left or right).  Position
the fender with the bolts in the middle and
front holes.  This should place the fender
over the tire with equal spacing in the
front and back.

Brave Products, Inc.

14

800-350-8739

Assembly Instructions

Содержание VH0622

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды