38
BRAVE Steel
–
User and service manual
Choose the first button of password from buttons that are the least
used for direct dialling (-prolonging time) (n/a for keyboard).
Be mindful about conformity of numbers (i.e. when 1 password
contains another for example for relay 1 it is 1234 and for relay 2
12345) as the first password will start the action once button 4 is
pressed and you will never be able to input button 5 to start action for
password 2, and if you choose 234 for a second relay, then after
pressing 4 both relays will start.
Note.
When setting parameter
32,33,34
signs # and * are not used because they are
not on the button panel, number 0 represents button no. 10.
Parameter
Value
Meaning
Basic
35
r aa
command
aa
from phone for switching
relay
r
1 impulse (00-99,*0-*9)
155 266
r
– relay number [1-2]
aa
– command (internal code) for switching on the relay from the phone [2
spaces] /
1
To set the same commands for both relays (internal code) so that both relays
activate at the same time. It is also recommended that the same command is
set for „relay on‟ and „command to disconnection of system (
parameter 43
)
aa=bb
.
/
1
– command is always 2 digits, but if you wish to control relay with a single
digit from the phone, there is an option to input "
*a
", where
a
is a single number
and the star represents an empty space and must be in the first place.
Example:
1 relay switch on internal code 48
– is programmed
35148 ♫
2 relay switch on internal code 8 - is programmed
352*8 ♫
By choosing no 8 on the phone we switch on just the second relay, with option 48 we
switch on both relays
Parameter
Value
Meaning
Basic
36
r cc
command
aa
from phone for switching
relay
r
2 impulses (00-99,*0-*9)
150 260
r
– relay number [1-2]
cc
– command (internal code) for switching on the relay from the phone [2
spaces]/
1
To set the same command for both relays (internal code) so that both relays
activate at the same time
/
1
– command is always 2 digits, but if you wish to control relay with a single
digit from the phone, there is an option to input "
*a
", where
a
is a single number
and the star represents an empty space and must be in the first place.
Switching a relay on with 2-impulses is used for sliding gates replacing a gate
entry.
