BRAVE Steel
–
User and service manual 31
3.3.2 Incoming call
An incoming call is a call to the system (started by a person inside the
building). After choosing the branch the system is connected and the
line rings, following a set number of rings (
parameter 51
) the system will
then pick up and it is possible to speak. The options are the same as an
„outgoing call‟ (chapter 30)
One except
ion is in the first 10sec. when it is also possible to input „# and
a service password‟ (
parameter 44
) directing the system to go to the
programming regime.
Another exception is during incoming call and DIP1 is switched to on
(
"SERVIS"
) when the system also goes to the programming regime
(without a service password).
The final exception is relay controls (
parameter 381 a 382
), when an
incoming call can disable the relay controls.
3.3.3 Door Entry System with keyboard
– module BSKey
If a keyboard module is connected to the system, then it is necessary
to set the following parameters:
parameter 48
– rank of the keyboard. If it is „set 0‟, the keyboard is not
there, if it is „set 1 – 8‟, then this number represents a position where
the keyboard is connected on the PCI (represents the number of flat
cables between the keyboard and the basic module).
parameter 49
– keyboard regime.
o
If it is 0, then the phone number from the keyboard is dialled in
the same way as from a phone. The visitor enters a number
combination and after a length of time, set by the max time
between key presses (
parameter 53
), the Brave picks up and
dials the given number.
o
If 1 then the keyboard choses a 2 digit combination 01-99 as
per the memory address, where a telephone number is saved.
The memory is the same (shared) as the button memory. The
number choice depends on the Day/Night setting.
parameter 40
– choses the DTMF from the keyboard during a call.
Parameter value 40
Meaning of symbol
0
No DTMF from the keyboard
1
DTMF *
2
DTMF #
3
DTMF A
