BRAVE Steel
–
User and service manual 17
1.6 BSKey keyboard connection
Connecting the keyboard module is done with a flat cable like BSC-
mod4, the only difference is that the keyboard module can only be connected
to the first 8 places following the basic module, which means that there can be
only 58 buttons before the keyboard. The buttons can continue up to a 99 after
the keyboard.
Be careful when programming
– It is necessary to determine exactly where the
keyboard is connected
(parameter
48
– page 40)
Options are chosen by
pressing the numbered buttons,
to input a password press the
button with key symbol
first, to
disconnect press the
button
and the door system will disconnect a call or cancel the process of (Cancel).
The keyboard function is activated by parameter
48
.
If the parameter is
48=0
, all the buttons (including the keyboard if
connected) connected to the basic module behave like normal buttons
and the first 10 buttons can be used as a lock for a code.
If the parameter is
48>0
, then there is a keyboard in the system. The
number behind parameter 48 determines the keyboards place
– for
ease, it is the number of flat cables between the keyboard and the
basic module. It is then only possible to input the lock for a code from
the keyboard after pressing the key button
.
The keyboard has 2 basic regimes for dialling the phone numbers (parameter
49
)
.
Direct choice of phone numbers
– press numbers on the keyboard like
you would on a phone (max. 24 digits)
Choice from the door system‟s memory – press only 2 digits on the
keyboard i.e. a memory address (01- 99). This option saves the
connected buttons, as it is easier to use a smaller number of buttons
for direct dialling from the memory regime if you have a larger number
of participants.
Note:
button 1 on the basic module uses the same memory of telephone
number as option 01 on the keyboard
– there memory for up to 99 day-time
numbers and 99 nighttime numbers, the keyboard uses the same memory as
the buttons!
You can set the DTMF dialling option with parameter 40 during a phone call.
Because on the keyboard the button
is used purely for disconnection and
cancelling, you can set option * / # under button
for parameter 40.
