BRAVE Steel
–
User and service manual 27
3 Door Entry System Operation
The Brave
Steel door entry system‟s functions are set by establishing
parameters (see the chapter on parameter programming page 33).
3.1 Signalling overview
Brave Steel acoustic signals that occur during its operation. Samples of
sounds can
be listened to in the setting programme „BraveSet‟.
State
Tones
Tone frequency
Pick up line type 1
–▄▔▄▔▀–
980-1333-1650
Disconnection of line type 1
–▀▔▄▔▄–
1650-1333-980
Pick up line type 2
–▄▔▀–
800-1067-1200-1333
Disconnection of line type 2
–▀▔▄–
1333-1200-1067-800
Confirmation of command from the phone
––█––
800
Ticking during a call
─┴─┴─
Notice about the end of a call
–▔–▔–▔–
1333
Relay switch signal
─▒▒▒▒▒▒─
Modulated
Entry into programming from the phone
–▄▔▀–
980-1067-1180
Programming from the phone
––▓–▓–––––
Modulated
Parameter confirmation
––█––
800
Entry into programming from the PC
–▄▔▀–
980-1067-1180
Line connection (Reset)
–▔–▄–▔–
1850-1067-1850
Error (generally something is not right)
–▔–▔–▔–▔–▔–
▔–
800
Empty memory (no number is programmed)
–▄▔▄▔▄▔▄▔–
1300-2100
It is useful to know what tones the Brave Steel plays during installation
as it will assist in the analysis of its state and operation. The sounds can be
turned off in several levels (
parameters 61,62,63 and 65
).
To play and listen to the sound signals go to:
www.alphatech.cz/zvukova-
signalizace-3.html
