8 Operating Instructions IQ-ONE / IQ-ONE+
Bräuniger GmbH
Option-Mode ALT1
Further long pressure on the Set-Mode key brings the
instrument into Option-Mode.
Option
1 Unit
The units of height to be displayed are set here.
Option 2 Unit
For the ALT1 value hPa or inHg pressure units can be
chosen.
Option 3 Corr
Pressure corrections can be made in this mode. This may
become necessary when the pressure sensor, after several
years use, is no longer exact.
The maximum correction possible is +/- 47.9 hPa.
A short press of the Altitude Key cycles you back to
Option 1.
Set-Mode ALT2
While in the
ALT2
display, press the Altitude Key for three
seconds to bring the instrument into
ALT2
Set-Mode.
In ALT2 Set-Mode a reference height can be set (e.g. the
relative height to a goal or waypoint). In order to do this ALT2
must be set to relative height.
3s
3s
