13 Operating Instructions IQ-ONE / IQ-ONE+
Bräuniger GmbH
Sink Alarm
Audio keys
Key
Audio-
changes
Set
Option
Direct
choice
Sink alarm
On/Off
Audio
Sink alarm
Setting of
start level with
keys
Unit
TEMP
°C, °F
Corr
Correct
temp
sensor
-8.0
to+7.9
Unit
Speed
km/h, kts,
mph
StALL
Stall
speed
Corr
SPEED
Correct
speed
50..100..
150
SPEED
diSP
Display
change
Temp 4s,
Speed
30s, 60s,
120s,
∞
Direct functions
The sink alarm is switched on or off with this key.
The sink alarm sounds when a certain sink speed is
exceeded.
Sink Alarm Set-Mode
Further long pressure on the sink key brings the instrument
into Alarm Set-Mode.
The speed at which the alarm activates can be set here.
Sink Alarm Option-Mode
Further long pressure on this key in the Set-Mode brings the
instrument into Option-Mode.
Option 1 Unit
The units of temperature can be set here. There is a choice
between °C or °F.
Option 2 Corr Temperature
Correction
Temperature deviation can be corrected here. The maximum
correction values are approximately –8.0 to +7.9°C. This
correction is necessary when it is felt the temperature sensor
is wrong. However, remember how difficult it is to measure
temperature exactly. The temperature display has a certain
delay because the temperature sensor is measuring the
temperature inside the instrument - so it may not match the
ambient air temperature.
Note:
The IQ-ONE can accept input from an optional Vane Wheel Airspeed sensor.
(available separately) The plug-in port for the sensor is on the left side of the instrument.
Option 3…6 are only available if the airspeed sensor is plugged in!
3s
3s
Key
3s
Key
3s
Key
short
