14 Operating Instructions IQ-ONE / IQ-ONE+
Bräuniger GmbH
Option 3 Unit
( Set speed units )
Units for the speed display are chosen here. The choices are
km/h or kts and mph.
Option 4 Stall
( Stall Speed )
The stall alarm sounds when flying too slowly results in an
interruption to the laminar flow.
The stall alarm can be switched off (value shows 0 km/h), or
can be set from 10 km/h upwards.
Option 5 Corr Speed
( air speed correction )
A wing wheel sensor is used as a speed indicator (can be
bought separately).
Speed correction is in %. This correction is necessary when
you are under the impression that the displayed speed is
incorrect. The accuracy of the speed displayed is greatly
influenced by the mounting position of the speed sensor,
therefore, you should take care when installing the wing wheel
sensor. Inaccuracy of the wing wheel sensor can be due to
the production process in the range of +2.5% (industry
standard).
Option 6 Speed Disp
Speed Display
Speed Disp shows if, and after what time lapse, change from
speed to temperature display takes place.
The following can be chosen:
- speed only
- change after 30 seconds
- change after 60 seconds
- change after 120 seconds
The temperature display appears for 4 seconds. If no speed
sensor is switched on, only temperature is displayed.
