background image

21                                       Operating Instructions IQ-ONE / IQ-ONE+ 

Bräuniger GmbH 

Maintenance and Care 

Water Damage 

Water damage invalidates the guarantee. 

If  the  instrument  suffers  water  damage,  proceed  as  follows.    Remove  the  batteries  at 
once.  Rinse  the  instrument  with  fresh  warm  water.    Dry  the  instrument  (e.g.  warm  air, 
hair  dryer).  Send  the  instrument,  as  soon  as  possible,  to  your  BRÄUNIGER  GMBH 
dealer or direct to BRÄUNIGER GMBH for testing. 
 

Warning

: NEVER dry the instrument in a microwave oven. 

 

Malfunction 

Should you have a problem when running the instrument, remove the batteries for five 
minutes. When the batteries are returned, the instrument carries out a self test. 
If  the  problem  persists  send  the  instrument,  with  a  description  of  the  problem,  to  your 
BRÄUNIGER GMBH dealer or direct to BRÄUNIGER GMBH. 
 

Guarantee Limitation

In rare cases it may happen that the instrument does not provide any data at all, or the 
data  is  incorrect.  BRÄUNIGER  GMBH  is  not  responsible  for  any  damages  due  to  the 
incorrect functioning of the instrument. 

Responsibility for ensuring safe flight lies with 

the pilot alone.

 

 
 

Technical Data 

Size:                                       138 x 74 x 23 mm  ( 4-3/8 x 2-3/4 x 13/16 inches ) 

Weight:                                   178 grams  ( 6.278 ounces ) with 2 alkaline batteries, 

without mountings 

Power Supply:                         2 x AA alkaline batteries or NiMH batteries 

Battery Life:                             >250 hours with 2 alkaline batteries 

Altimeter:                                 max 11,500 m  (37,700 feet ), 1 m  ( 3 ft ) steps 

Variometer:                             analog ± 10 m/s ( 2,000 ft/min ), 0.2 m/s, ( 40 ft/min) steps  

                                                digital ± 96 m/s (19,200 ft/min), 0.1 m/s steps (10 ft/min ) 

Integrator (Vario Averager):    adjustable from 1 sec to 30 sec 

Speed Display:                        digital 0 to 160 km/h  ( 99 mph ) 

                                                displayed in km/h, kts or mph 

                                                resolution: 1 mph, 1 km/h or 1 kts 

                                                calibration range ± 50% 

Temperature Display:              -50°C to 76°C  ( -72.4°F to 168.8°F) 

Содержание IQ-ONE
























Отзывы: