Operation Manual IQ-MOTOR-eco GPS
1.2
Keypad
1.3
Operation philosophy
The IQ-MOTOR-eco GPS instrument is very easy to handle and intuitive. Just try it a few times,
and you will discover that one can get along very rapidly with the simple menu structure. However,
please note some essential instructions regarding the various functions.
- White key lettering:
display screen shifts such as for ex. ALT1 / ALT2, Vario- acoustic settings,
F1 / F2 key commands and the (
i
) information retrieval, can be performed speedily during the flight
by
short pressure
on the key.
- Yellow key lettering:
by
long pressure
of 3 sec.
important functions may be called up directly
during the flight and may also be edited.
The selected function is switched-off after approx.
8 seconds in case of non-use!
- Main menu
: all instrument settings, but also Waypoints-, Routes- and flight memory, can be
set prior to the flight via the
Main menu
(MENU key). It is possible to select within the menu
submenus by use of the up-/down keys and to enter adjustments. The main menu is quitted
automatically at 30 seconds after the last entry.
Tip:
all instrument settings of the Main menu can be set comfortably by use of the freebie
PC-Software Flychart on the PC and be transferred via USB-interface onto the instrument.
1.3.1
Function related keys F1 and F2
Both keys
F1
and
F2
alter their setting possibility according to selected function or readout
screen. The meaning of the related key is indicated on the display screen.
Example: in setmode ALT 1 the function of F1 is "
accept GPS altitude"
and the function of F2
is to set the altimeter to
„FL 1013mB pressure“
!
Audio Volume
Alarm Settings
Altitude display
Shift ALT1 / ALT2
Settings altimeter
Shift graphics display
in setting mode up / down
during flight: insert marker into flight
recording / Memorise position as Waypoint
Acknowledgement key OK
Main Menu
i
Info key:
display of current
coordinates or of Information
Display shift - time / altitude 3
On/Off key
Escape
key
Diff. Altimeter 3 reset to 0
Route or Waypoint
activate / deactivate
Function related key F2
Function related key F1
